Cappels' project pages
A ZIF ISP Adapter For Up To 40 Pin AVR Controllers
This adapter can handle up to four different pin-outs.
With larger jumper blocks of course it could handle even more.
figure 1. Ten jumper blocks of four settings each allows the
needed flexibility. Currently wiring is described for the ATTINY2313 and
ATMEGA48 ans similar controllers.
Find updates at www.projects.cappels.org
Figure 2. The yellow LED glows when the reset pin is pulled low, indicating that programming is taking place.
Contents ©2016Richard Cappels All Rights Reserved. Find updates
First posted in May, 2016
You can send email to me at
"(at)" with "@" before mailing.
presented on this page is for personal, nonprofit educational and
use only. This material (including object files) is copyrighted by
Cappels and may not be republished or used directly for commercial
For commercial license, click
and intellectual property notice
(Summary: No warranties, use these pages at your
own risk. You may use the information provided here for personal and
educational purposes but you may not republish or use this information
for any commercial purpose without explicit permission.) I neither
express nor imply any warranty for the quality, fitness for any
particular purpose or user, or freedom from patents or other
restrictions on the rights of use of any
software, firmware, hardware, design, service,information, or advice
mentioned,or made reference to in these pages. By utilizing or relying
on software, firmware, hardware, design, service,information, or advice
provided, mentioned, or made reference to in these pages, the user
takes responsibility to assume all risk and associated with said
activity and hold Richard Cappels harmless in the event of any loss or
expense associated with said activity. The contents of this web site,
unless otherwise noted, is copyrighted by Richard
Cappels. Use of information presented on this site for personal,
educational and noncommercial use is encouraged, but unless explicitly
with respect to particular material, the material itself may not be
or used directly for commercial purposes. For the purposes of this
copying binary data resulting from program files, including assembly
code and object (hex) files into semiconductor memories for personal,
educational or other noncommercial use is not considered republishing.
desiring to use any material published in this pages for commercial
should contact the respective copyright holder(s).